STRIP AWAY
REMOVES COATS OF
- Old Alkyd undercoat & Gloss paints
- Pre 1970s Lead based coatings
- Alkyd Varnishes
- Interior Artex paints (vinyl based)
- Vinyl Matt & Silk Emulsions
- Some “sprayed” exterior coatings.
SAFE ON SURFACES OF
- Softwood frames & doors
- Plaster / Brick / Concrete
- Glazed Ceramic Tiles, Glass & uPVC
- Cast Iron & Steel
- Stone & Slate
WILL NOT REMOVE
- Acrylic paints & stabilising sol’ns
- Polyurethane varnishes
- Two-pack epoxy paints
- Lime-wash / Snowcem
- Heat applied enamels & coatings
- Exterior paints with “Pliolite” resin
- Powder / automotive coatings
AVOID STRUCTURES MADE OF
- Hardwood timbers
- Veneers, Laminates &, Compressed board
- Resin – based plasters
- Aluminium & its alloys
- Gesso plaster
- Marble
STRIP AWAY LV
REMOVES COATS OF
- Water-based Acrylics
- Cellulose / Chlorinated rubber
- Polyurethane varnish & sealer
- Most exterior acrylic masonry paints
- French polish & Shellacs
- Pliolite based exterior paints
SAFE ON SURFACES OF
- All metals incl. brass, bronze & copper
- Aluminium and its alloys
- Hardwood timbers, oak & ash
- Fibreglass & uPVC
- Plaster / Brick / Stone / Concrete
- Softwood timbers
WILL NOT REMOVE
- Two-pack epoxy paints
- Powder / automotive coatings
- Heat applied coatings & enamels
- Lime-wash / Snowcem
- Old stabilizing solutions
AVOID STRUCTURES MADE OF
- Gesso plaster
- Veneers & Laminates *
- compressed board *
* Note: STRIP AWAY LV may be used on these surfaces providing dwell time is controlled and limited (test first)