Laticrete HYDRO BAN

Description

HYDRO BAN is a thin, load bearing waterproofing/crack isolation membrane that DOES NOT require the use of fabric in the field, coves or corners. HYDRO BAN is a single component self curing liquid rubber polymer that forms a flexible, seamless waterproofing membrane. HYDRO BAN bonds directly to a wide variety of substrates.
  • Allow for flood testing in 2 hours at 21°C or higher
  • Does not require the use of fabric.*
  • Bonds directly to metal, PVC and ABS plumbing fixtures only
  • Thin; only 0.5–0.8 mm thick when cured
  • Changes in colour from a light sage to an olive green when cured
  • Anti-fracture protection of up to 3 mm over shrinkage and other non-structural cracks
  • “Extra Heavy Service” rating per TCNA performance levels (RE: ASTM C627 Robinson Floor Test)
  • Exceeds ANSI A118.10 and A118.12
  • IAPMO approved
  • Contains antimicrobial product protection
  • Rapid drying for a faster time to tile
  • Lighter colour for ease of inspection
  • Safe—no solvents and non-flammable
  • Install tile, brick and stone directly onto membrane
LATICRETE HYDROBAN